07012016Fri
Last updateFri, 01 Jul 2016 3pm

i

Fugitive Emissions—Issues and Opportunities

Fugitive Emissions—Issues and Opportunities

Fugitive emissions, ppm, consent decrees...

Problem-Driven Innovation

Problem-Driven Innovation

Developing Alternative Technology to Imp...

Valve Repair Takes Center Stage in Houston

Valve Repair Takes Center Stage in Houston

Attendees gathered June 2-3 in Houston t...

What Internal Best Practices Can Do for Valve Selection

What Internal Best Practices Can Do for Valve Selection

As time goes by, technology moves forwar...

The Weekly Report

New Products

  • ja-news-2
  • ja-news-3

Industry Headlines

ISM: Manufacturing Activity Expanded in June

Friday, 01 July 2016  |  Chris Guy

Manufacturing expanded in June as the PMI registered 53.2%, an increase of 1.9% from the May reading of 51.3%, indicating growth in manufacturing for ...

Readmore

Loading...
Advertisement
i

Industry Headlines

Watson Valve Upgrades Oxygen Clean Room

1 DAY AGO

In an effort to ensure proper cleaning procedures are performed on valves intended for oxygen service, Watson Valve Services has upgraded its existing clean room within its manufacturing plant in Houston. Watson Valve Services’ clean room is operated by trained technicians, and is constructed wi...

Readmore

Emerson Selected to Upgrade SE Virginia Wastewater Utility

2 DAYS AGO

Emerson Process Management is replacing an outdated supervisory control and data acquisition (SCADA) system as well as remote terminal units (RTUs) used throughout Hampton Roads Sanitation District’s (HRSD) wastewater collection system. Currently, HRSD serves about 1.7 million people over an are...

Readmore

U.S. Natural Gas Making Up for Coal Plant Closures

1 DAY AGO

"Five years ago, opponents of newly proposed clean-air rules sounded dire warnings of blackouts and surging electricity prices if coal-burning plants were shuttered,"  Bloomberg  reports .

"Instead of rising, the price of electricity in the nation’s largest grid is now 40% lower than it ...

Readmore

U.S. Crude Storage Capacity Utilization Rises Even as Capacity Grows

2 DAYS AGO

Weekly U.S. commercial crude oil inventories have increased by more than 71 million barrels (15%) since the end of September, pushing crude oil storage capacity utilization to a near record high of 73% for the week ending June 10.

The U.S. Energy Information Administration (EIA) measures crude oil stor...

Readmore

ISM: Manufacturing Activity Expanded in June

7 HOURS AGO

Manufacturing expanded in June as the PMI registered 53.2%, an increase of 1.9% from the May reading of 51.3%, indicating growth in manufacturing for the fourth consecutive month, and is the highest reading since February 2015 when the PMI registered 53.3%.

Of the 18 manufacturing industries measured b...

Readmore

NAM Reacts to Trump’s Anti-Trade Comments

2 DAYS AGO

GOP presidential candidate Donald Trump, speaking Tuesday near Pittsburgh, expressed fierce opposition to free-trade agreements and criticized Hillary Clinton for supporting them. Trump blamed Clinton and her husband for the loss of millions of manufacturing jobs and threatened to pull the U.S. out ...

Readmore

A-T Controls M-Series Metal Seat Ball Valves for High Temperatures and Abrasive Surfaces

a-t controls m-series metal seat ball valvesNew M-series metal seat ball valves from A-T Controls are engineered with specially coated matched balls and seats to stand up to high temperatures, pressures and abrasive materials encountered in the oil/gas, chemical, power generation, pulp and paper, food processing and mining industries.

Valves in the M-Series have a temperature range of -20°F to 661°F, and a pressure rating up to ANSI class 600. M-series ball and seat materials include stainless steel, stellite welded, and hard chrome-plated steel, allowing the valves to perform well in applications involving abrasive fluids and steam. Two optional coatings are also available - a tungsten carbide (TC) coating for heavy slurry environments, and a chrome carbide (CC) coating for higher temperature applications. An oversized stem prevents deformation at higher pressures and temperatures. Larger ball design provides a tight seal, preventing leakage, and an Inconel seat spring maintains positive contact between the ball and seat during operation.www.a-tcontrols.com

  • Latest Post

  • Popular

  • Links

  • Events

Advertisement

Looking for a career in the Valve Industry?

ValveCareers Horiz

To learn more, watch the videos below or visit ValveCareers.com a special initiative of the Valve Manufacturers Association