Last updateThu, 13 Dec 2018 5pm


Maintenance & Repair

First Valve Repair Event Shows Depth of Today's Issues

13 wnt m-r 1Bolts are tightened with a hydraulic torque wrench.Repair and maintenance is one of the most critical areas of today’s valve world and attendees at the Valve Repair Council’s first Valve Repair Meeting & Exhibition last fall found out why. From the value of radio-frequency identification (RFID) tagging to the latest proposed standards, speakers brought their audiences up to date while vendors to the industry showed the latest in products and services that can keep this nation’s facilities in tip-top shape.


The November 2012 event took place in Houston. Here are some highlights from the presentations made at the conference:

PRV Reliability

13 wnt m-4 fig1To keep the nation’s industries running smoothly requires a way to test and assure that valves and other equipment are operating like they should. The presentations began with Joseph F. Ball, P.E., director of the Pressure Relief Department at the National Board of Boiler and Pressure Vessel Inspectors, who presented findings from a survey of nearly 22,000 tests of reliability for pressure relief valves (PRVs). The sample included data from the national board’s test lab and other accepted test labs and started from the year 2000. The standards for testing come from the ASME pressure vessel code. To ensure that facilities meet those standards, inspectors check out the manufacture and assembly process, then test valves chosen from stock. The valves in this sample of 22,000 reliability studies were tested with air, steam and water.

While about 85% of tested valves passed (figures that look positive), Ball pointed out that this means a 15% failure rate (Figure 1).

He also said that, while not all failures are critical, those that fall into the critical range include those with set pressure higher than 116%, valve capacity less than half of what the valve is rated, and rupture disc failures to open. He stressed that the codes and standards are vital and that it is important to recognize the value of ASME Code/NB Certification and Repair Certification. These tight requirements provide extra margins for safety, and the test issues cause suppliers to be more vigilant than might otherwise be the case. He also said it’s important for valve users to provide feedback on any issues they have come up against, and if there is any suspicion about the validity of certification, they should go to the national board.


In his work conducting performance evaluations and failure analyses, Vinod Sharma, senior managing engineer, Mechanical Engineering, at Exponent is called upon to address questions of liability, product recall, economic and market due diligence, technology assessment, business process improvement and intellectual property. From that perspective, Sharma pointed out that only a small percentage of valves are a problem, but those that are can create catastrophic failures and losses. While everyone in the industry focuses on safety as well as making and saving money, Sharma said it is important to set up procedures and practices within your company to protect against potential charges of liability for catastrophe.


13 wnt m-r 2BoltingJon Gans, Ph.D., technical training manager at Granite Services, Inc., condensed the information he usually presents during a one-day course into a well-received hour-long presentation on the criticality of torque and load in bolted joints.

He explained how critical the ­common bolt can be.

“Bolts are really the only way to join big pieces of equipment, which allows you to take them apart to maintain the equipment, but there are many factors that must be considered,” Gans said. “Bolted joints must stay together until a decision is made to take them apart. It is inexcusable for a joint to fail because we have the tools available to calibrate and make them 100% fail-safe,” he said.

“What we do not have are the people trained to meet the requirements,” he added. While welders have to be certified, anybody in a plant can pick up a tool and close a joint, he explained. This is despite the reality that there are so many considerations, including enough but not too much tension and the fact the three component groups of a joint, which are flanges, fasteners and gaskets, must operate together as a system. The bolting sequence is critical, he added. Each part must be right to obtain a seal, and you can’t compensate for a problem in one part of the system by overcompensating on another part of the system.

It is absolutely critical that flanges be aligned properly, and even though a system can get up and running, radial or lateral misalignments in that system create the chance for leaks or huge problems later on. Bolts are not flange alignment tools and the proper torque is absolutely essential, he said.

13 wnt m-r 3Pressure relief valve repair


RFID technology holds much promise for the valve industry and is especially promising in maintenance and repair. Brent Scheps, president, and Cory Foster, sales representative at IDS Tag enumerated the benefits RFID technology has for the valve industry and explained how such technology is used during a repair.

While RFID technology has been around since the 1960s, it recently became sophisticated enough to ­provide valuable information far beyond the number of widgets in a warehouse, in both active (information can be sent and received) and passive (for tracking) forms, he pointed out. Tags are just a computer chip and an antenna that can be housed in anything: a steel container, pipes, anywhere. Even with a passive tag, as long as that tag is intact, it is readable, he said.

RFID tags, which are custom fit to a facility and its needs and are designed for maximum accuracy, reliability and durability, are becoming increasingly important in all industries, including valves. The technology provides a unique number that prohibits counterfeiting and any purchaser can find out if it’s a valid piece of equipment by tracing that number. RFID also makes it much easier to track the history of the equipment throughout the supply chain. Additionally, all of the documentation for the repair or replacement of any asset, such as a pressure relief valve, can be housed in the chip. That means maintenance turnaround times and the costs associated with them are greatly reduced. Information can also be added in the field to the “file” that is in that tag so that maintenance and repair can be updated.


13 wnt m-r 4Testing for fugitive emissionsRich Davis, business development manager at Flexitallic Sealing Technologies, has been involved in the creation and implementation of test standards covering fugitive emissions since 1990. He shared insights on those standards with attendees at the conference. One of those standards is API 622, which establishes requirements and parameters for tests of fugitive emissions, corrosion and packing material composition and properties. The test methods apply to valve packing for use in on-off valves with rising stems and rotating stems. Davis pointed out that this standard is not intended to replace type testing of valve assemblies or valve production testing, and that valves can no longer be tested to API 622—the test applies only to packing. For packing, the test means that a test fixture is subject to a total of 1,510 mechanical cycles and five thermal cycles over five days.

Davis also talked about API 624, a new standard currently under development for type testing of rising stem valves equipped with flexible graphite packing for fugitive emissions. The standard specifies the requirements and acceptance criteria (100 parts per million by volume) for fugitive emission testing of rising and rising-rotating stem valves equipped with packing previously tested in accordance with API Standard 622. The standard is key “because now you know that the packing that goes into the valve must have already been tested by 622,” Davis said. “This reinforces the fact that the packing manufacturers must be doing the testing. It is not the valve or refurb or repair companies [that must test]—it is the packing companies.”

The test is only 310 mechanical cycles and three thermal cycles.


In their presentation, Bob Donalson, operations manager, North America Oil and Gas Service, and Kevin Simmons, global service and aftermarket ­manager, Pressure Management Group at Pentair, discussed maintenance and repair programs for pressure relief valves, pointing out that much goes into the true cost besides the initial product cost.

Be sure to check VALVEmagazine. com for more in-depth coverage of some of the presentations from the 2012 Valve Repair Council Repair Meeting & ­Exhibition.

For extensive information on the specifics of presentations, refer to VALVEmagazine.com. Key points the presenters brought out are:

  • PRVs have a critical role in maintaining safety and protecting life and property.
  • Know applicable codes and standards.
  • Seek expert assistance when sizing and selecting valves.
  • Manage the lifecycle costs to reduce maintenance and associated operating costs.
  • Take no shortcuts and follow manufacturer’s recommendations when repairing valves. Experience is ­critical.
  • Reduce maintenance costs by managing parts and spares.
  • Implement an asset management program to improve uptime, optimize planning, resourcing and spend.
  • Communication is key. Best results are achieved when operators, valve manufacturers and service providers work together for a common goal.

Kate Kunkel is senior editor of VALVE Magazine. Contact her at This email address is being protected from spambots. You need JavaScript enabled to view it.


Subscribe Fall18


• Print magazine
Digital magazine
• VALVE eNews
Read the latest issue

*to qualified valve professionals in the U.S./Canada

Looking for a career in the Valve Industry?

ValveCareers Horiz

To learn more, visit the Valve Careers YouTube channel to watch the videos below or visit ValveCareers.com a special initiative of the Valve Manufacturers Association

  • Latest Post

  • Popular

  • Links

  • Events

New Products