08182018Sat
Last updateFri, 17 Aug 2018 5pm

i

ASCO: Additional 362/562 Series Spool Valve Pipe Sizes

ASCO 362 562 Series Spool Valve Pipe SizesASCO has added to its 362 and 562 Series of brass and stainless steel spool valves by introducing 3/8-inch and 1/2-inch pipe sizes that feature the industry’s highest flow rates and low-power consumption. These new sizes provide design engineers with additional solutions for control valve automation, especially in the upstream, midstream, and downstream oil and gas markets.

The valves exceptionally high flow rates will enable original equipment manufacturers to use smaller piping and purchase lower cost valves while achieving the same flow specifications.

The ASCO 362 Series is a three-way valve made for single-acting process valve applications. The ASCO 562 Series is a four-way spool valve designed for double-acting process valves. The product lines are available in 1/4-inch, 3/8-inch, 1/2-inch, 3/4-inch, and 1-inch sizes.

For more information, visit www.asco.com


Hunt Valve: Proportional Poppet Valve

Hunt Valve Proportional Poppet ValveHunt Valve has announced a new proportional poppet valve for descaling applications that lasts three to five times longer than traditional poppet valves. By eliminating the effects of water hammer and system shock, this innovative poppet valve technology promotes safety in the plant and cuts operating costs in half.

At steel mills, persistent water hammer in high-pressure piping systems often leads to burst pipes, cracked welds and descale header damage. Hunt Valve’s proportional poppet descale valve can be programmed to eliminate water hammer in the system. Typically, the speed is only reduced for the last 10 to 20% of the stroke, just before completely shutting off flow to the descale header. This slow rate of closure can be fine-turned via the integrated local control interface or programmable logic controller (PLC).

For more information, visit www.huntvalve.com

DeZURIK: Valve Selection Guide for Pulp & Paper Industry

DeZURIK PP GuideDeZURIK/APCO/Hilton has released its new Valve Guide for the Pulp and Paper Industry. The guide, which is designed to help users navigate the valve selection process, provides usage guidance based on valve type, general specifications and common industry applications.

DeZURIK has a wide variety of valve styles to meet the application requirements of the pulp and paper industry, including the newest innovations in control, gate, plug, butterfly, automatic air and check valves. DeZURIK manufactures valves for basis weight control, paper stock, liquor, steam, dilution water control and other applications.

The selection guide uses color-coded graphics and detailed diagrams to help direct users based on specific industry applications. While the guide serves as a strong starting point in the valve selection process, DeZURIK also encourages customers to enlist the expertise of their technical sales representatives while navigating this process.

For more information, visit www.dezurik.com

Spirax Sarco: VLM20 Inline Vortex Flowmeter

Spirax Sarco VLM20 Inline Vortex Mass FlowmeterSpirax Sarco announces the rebranding of the VLM10 Inline Vortex Flowmeter to VLM20. The VLM20 utilizes a common electronics platform that is now available in all the new 20 Series Meters to improve reliability and ease of use across the product line. The VLM20 utilizes a SMART multivariable transmitter with integral temperature and pressure sensor giving users an elegant all in one solution for their measurement needs. A precision 1000 Ohm RTD and absolute pressure sensor are used to calculate density for mass flow and thermal energy flow from chilled, hot water and condensate return system.

The VLM20 is precise and reliable with a steam or gas mass flow accuracy of ± 1.5% of rate over a wide 30:1 flow range. Digital communications deliver real-time calculations of density, temperature, pressure, mass and thermal energy flow using Modbus RTU, BACnet® MS/TP and HART® communications in addition to the standard analog, pulse and relay outputs.

The VLM20 is available in line sizes ½" to 12" with flange ratings up to 600lb. ANSI. Wafer connections are also available from ½" – 4". Wetted material includes carbon steel and 316L stainless steel.

For more information, visit www.spiraxsarco.com/us

ASCO: Zoned Safety Capabilities in Numatics 503 Series Valve Manifold

ASCO Manifold Zoned SafetyASCO has introduced the capability to integrate multiple safety zones within a single Numatics 503 Series valve manifold. This new zoned safety approach helps the design engineer satisfy the Machinery Directive 2006/42/EC and comply with ISO 13849-1 while eliminating the components and complexity found in discrete safety circuits.

The zoned safety concept is an integrated approach to machine safety and control that greatly simplifies the design of a redundant pneumatic safety circuit with a manifold system. The Numatics 503 Series can create up to three independent electro-pneumatic safety zones, while also allowing independent non-safe sections to co-exist within one manifold assembly. The operator does not have to shut down the entire machine by releasing compressed air with a redundant safety/control dump valve. Instead, the Numatics 503 Series valve manifold can be configured to shut down air and power only to the group of valves that controls the machine’s motion in the operator’s vicinity.

For more information, visit www.asco.com

Subscribe SUM18

FREE SUBSCRIPTION*

• Print magazine
Digital magazine
• VALVE eNews
Read the latest issue

*to qualified valve professionals in the U.S./Canada

  • Latest Post

  • Popular

  • Links

  • Events

New Products