Produced by
Produced by
Published November 15, 2011
Emerson Process Management’s new Fisher® VBL booster incorporates a fixed deadband, internal soft seats and an integral bypass restriction that combine to eliminate the positioner problems typically caused by boosters without these design features.
The new booster’s enhanced performance capability proves highly important in applications where a valve positioner alone cannot provide the stroking speed needed to meet rapidly changing process conditions and demands.
The new booster design features internal soft seats that yield tight shutoff to reduce unnecessary air consumption and eliminate saturation of positioner relays.
Adding to the VBL’s superior performance is its bypass restriction that enables fast actuator response. The restriction also allows tuning valve response to follow slow signal changes or provide on/off control. This fine-tuning capability does not impact booster deadband.
Compact and lightweight in design, the VBL booster features an aluminum body with ¼ NPT input and ½ NPT connections. Internal diaphragms, upper and lower valves, and O-rings are of HNBR. Maximum input signal pressure is 10.3 bar (150 psig) with an input to output ratio being fixed at 1:1.
For more information, visit www.emersonprocess.com
Flowserve Corporation has released the Flowserve Logix 3400MD, the newest member of the Logix series digital positioner family.
May 25, 2010
Flowserve announces the availability of the Limitorque MXa electric actuator with up to a SIL 3 safety rating.
September 17, 2012
AUMA has developed new actuation solutions for a range of specialized oil and gas applications, including an innovative approach for lift plug valves.
February 25, 2015
