Produced by
Published January 13, 2025
ifm’s MVQ positioner is used to move valves to the required position, based on a signal from the control level indicating the degree to which the valve is open in percentages.
ifm’s MVQ positioner is used to move valves to the required position, based on a signal from the control level indicating the degree to which the valve is open in percentages. Based on the MVQ sensor and supplemented by a new control unit, the connected solenoid valve is moved to the required position using supply and exhaust air. It has a self-learning algorithm to continuously monitor, improve and expand the performance of the positioner over time. The positioner comes as a set including the MVQ301 sensor and control unit, a pneumatic solenoid valve, a throttle plate and a Y cable, and can be installed directly on the NAMUR interface of an actuator. ifm.com
EST Group, a business unit of Curtiss-Wright Flow Control Company, is introducing its new GripTight® Isolation Plug, the latest addition to its pipe plugs and pressure testing tools.
September 4, 2012
The series is designed to improve safety and protect the environment from fugitive hazardous emissions.
May 3, 2023
The Rotork SVM (Smart Valve Monitoring) system has been selected to provide a networked solution for digital valve monitoring and partial stroke testing on a large scale oilfield installation in the Middle East.
January 22, 2013
