Produced by
While there may be 40 reasons valve actuators may stop working, there really is only a handful of components that can cause the problems. So, if you have an actuator on the fritz, here are the five things you need to check.
January 3, 2022
In systems that deliver water to more than 100,000 people, 30% of the pipes are 40 to 80 years old.
December 30, 2021
Emergency shutdown valves are specifically designed to shut the process, often carrying hazardous media, in the case of an undesirable event.
December 15, 2021
VMA’s 2021 Market Outlook Workshop included these four remaining sectors: Pharmaceutical; Electricity; Packaging, Tissue and Paper; and Commercial Construction.
November 1, 2021
Methane (CH4) is the second-largest greenhouse gas emitted in the United States. In 2019, CH4 accounted for approximately 10% of all U.S. greenhouse gas emissions from human activities. Methane’s lifetime in the atmosphere is much shorter than carbon dioxide (CO2), however, it is significantly more efficient at trapping radiation.
November 1, 2021
In today’s wireless world it’s no surprise that automation and manufacturing spaces have embraced—and sought out—the connectivity and convenience that wireless technologies offer.
November 1, 2021
Valves are used to control all types of fluids, and while some are easy to manage, others can be a challenge. At the top of the challenging list sits hydrogen, the smallest, lightest molecule known to man.
November 1, 2021
How to resolve—and avoid—field failures of knife gate and slurry valves
November 1, 2021
In the world of low-pressure and low-vacuum relief valves—defined for this article as valves with settings less than 15 psig—there are several different common valve configurations.
November 1, 2021
Without the chemical butadiene, people wouldn’t be able to drive their cars, cover their floors with carpet or go scuba diving.
October 1, 2021
Facilities use many different types of valves to keep themselves operating, and each valve within a plant serves a different function.
October 1, 2021
Manufacturers are currently experiencing unprecedented disruption of the supply chain on both the supplier side and the customer side.
September 22, 2021
