Produced by
Produced by
Most engineers, technical personnel and installation professionals involved with valve design and installation will inevitably need to consider a stationary seal at some point in their career.
April 18, 2016
Electric actuators are vital for operating a wide variety of valves and are used in many industrial applications.
April 11, 2016
Compression packing is the primary method employed to seal the stem of many types of valves.
April 11, 2016
The primary sources of fugitive emissions from refineries and chemical plants are equipment leaks, process venting, evaporation losses, flaring, and accidents and equipment failures.
April 4, 2016
The latest Valve Industry Leadership Forum, held March 22-23 in Denver, was attended by key personnel from VMA member companies.
March 30, 2016
Q: Can duplex stainless steels be hardfaced without adversely affecting the base material properties?
March 29, 2016
From time to time, we are re-posting particularly well-received articles that have previously run on VALVEMagazine.com so that those who might have missed them will be able to catch up on the best of the best.
March 28, 2016
Knife gate valves are used to provide isolation in various applications including oil sands slurries, pulp stock, waste water and power generation.
March 21, 2016
If industry is to address one of its most significant problems—the lack of skilled workers—it must face two realities: 1) the millennial generation, which in 2015 surpassed all other groups as the largest in the labor force, is significantly different than the generations that proceeded it, and 2) the toolbox for attracting and retaining millennials is different as a result.
March 15, 2016
To meet the increasingly stringent environmental and safety standards instituted by governments and standards boards, manufacturers and users alike must be constantly aware of changes and challenges for which they are ultimately responsible.
March 14, 2016
Experience has shown that quality assurance/ control project managers cannot rely on supplier material test reports (MTRs) alone to identify material used in new construction; MTRs can contain significant errors.
March 8, 2016
In today’s highly competitive business environment, every company should continually strive to improve every aspect of its business.
February 29, 2016
