Water hammer, high-velocity fluid flow and contaminated hydraulic media are among the worst enemies of high-pressure hydraulic systems.
October 11, 2016
In 2016, there is no “business as usual”, and speakers at VMA’s Annual Meeting offered sound advice to navigate the new reality of 21st century commerce.
October 6, 2016
While there are obvious differences from country to country, one could reasonably generalize by saying that what we have today is a combination of low growth, low inflation, increasingly ineffective economic policies, and increasingly destructive politics.
September 27, 2016
When it comes to linear valve installations, gravity is our friend.
September 27, 2016
One of the most important components of an automated threaded stem valve is the ubiquitous stem nut, a relatively simple and unsophisticated mechanical device that converts the rotary motion of an actuator into the linear stem movement needed to open or close one of the many types of gate valves or sluice gates.
September 19, 2016
For the first time in the seven-year history of the Valve Basics education program, the Valve Manufacturers Association (VMA) held a company-specific training event conducted by the VMA Education Committee’s Valve-Ed team.
September 14, 2016
Increased emphasis on the need to improve process performance and reduce variability mean many control loops today are optimized.
September 13, 2016
As was the case with many of the presenters at VMA’s Market Outlook Workshop held in August 2016, Randy Giggard of FMI Consulting noted that availability of labor at all levels is a major concern in the construction business.
September 12, 2016
On Aug. 2, 2016, OSHA fines increased, but critics ask: Does this higher fine actually increase safety?
September 6, 2016
Ceramic coatings extend the in-service life of equipment by enhancing the corrosion and wear resistance of the base material.
August 31, 2016
Typically, isolation valves are used to block off a pressure safety valve (PSV) from system pressure, so that maintenance on the valve or related equipment can be conducted without a shut down.
August 29, 2016
As was the case at last year’s event, speakers and attendees at this year’s Market Outlook Workshop were consistent in their concerns about the low price of oil and the high U.S. dollar.
August 22, 2016
