Produced by
Ceramic coatings extend the in-service life of equipment by enhancing the corrosion and wear resistance of the base material.
August 31, 2016
Typically, isolation valves are used to block off a pressure safety valve (PSV) from system pressure, so that maintenance on the valve or related equipment can be conducted without a shut down.
August 29, 2016
As was the case at last year’s event, speakers and attendees at this year’s Market Outlook Workshop were consistent in their concerns about the low price of oil and the high U.S. dollar.
August 22, 2016
One of the most keenly felt needs in today’s industrial world is the lack of skilled employees.
August 17, 2016
I am not a valve expert, although I often play one where I work.
August 17, 2016
A new test organization program and stamp has been authorized by the National Board of Boiler and Pressure Vessel Inspectors (NBBI), effective February 2016.
August 9, 2016
Process hazard analysis (PHA) is required by U.S.
August 3, 2016
These days, piping designers use automated systems that default to standard classifications such as pressure classes of 150 to 2500 for valves and associated equipment.
August 1, 2016
One major change in the economic picture that’s occurred since the beginning of this year is that “we’re starting to see improvement in terms of sentiment,” according to Chad Moutray, chief economist for the National Association of Manufacturers (NAM). He gave a third-quarter update via webcast July 21. “When I meet with manufacturing leaders around the country, I’m often asked: have we hit rock bottom?
July 25, 2016
Engineers need critical design information when choosing a seal for a particular valve application.
July 19, 2016
Society’s desire for a clean environment shines light on the importance of understanding the essential role wastewater treatment plants have in our communities.
July 18, 2016
To better understand the actuators and controls in our water systems, we discussed the types and some of the considerations for sizing in the first part of this article, which appeared in the print version of VALVEMagazine and is posted here.
July 7, 2016
